Cru HotPlug Field Kit Manuel d'utilisateur télécharger pdf (Page 3)

WiebeTech

HotPlug- Euro Version User Manual (A9- 000- 0036 REV. 1.1) - 3 -

HotPlug Operation

1. Unplug any cables connected to the power strip that are not connected to the device(s) you want to

capture.

2. Ensure the HotPlug power switch is in the OFF position.

3. Plug the input line cord into the HotPlug unit (receptacle labeled “IN”).

4. Plug the other end of the input line cord into the UPS. The HotPlug power switch will glow red,

indicating that HotPlug is receiving power.

5. Find an open connection on the power strip. Connect one end of the output line cord into the power

strip, and then the other end into the receptacle labeled “OUT” on HotPlug. The red LED (output

power indicator) will light.

NOTE: Many UPSs have both

surge-protected and battery-

powered outlets. Be sure to

use HotPlug with UPS outlets

that supply battery power.

UPS

HotPlug

1 2 3 4 5 6

Pas de commentaire

Cru HotPlug Field Kit Manuel d'utilisateur Page 3